DAP Weldwood High-Strength Multi-Purpose Ceramic Tile Adhesive is a professional-grade, latex-based adhesive designed for the installation of ceramic and mosaic tiles. This trowel-grade formula is suitable for interior applications on floors, walls, and countertops, providing a strong and permanent bond. The quick-grab consistency eliminates the need for bracing on vertical surfaces while allowing for easy spreading and repositioning. It is highly water-resistant once cured, making it ideal for areas exposed to intermittent moisture such as bathrooms and kitchens. This non-flammable, low-VOC adhesive meets or exceeds ANSI A136.1 Type I and Type II requirements for high-performance tile installation.
Weldwood Ceramic Tile Adhesive, High-Strength, Multi-Purpose, 1 gal Capacity, Can, 63.7 g/l VOC, 7 - 12 pH, Paste, White, 40 - 50 sq-ft Coverage, 2 - 4 hr Drying Time, 25 - 35 Min Application, 24 - 72 hr Functional Cure, Slight Ammonia Odor/Scent, >200 Deg F Flash Point, Media: Carbon Dioxide, Dry Chemical, Foam and Water Fog, Composition: Limestone, Polyacrylic Acid Emulsion, Ethylene Glycol, Silica, Crystalline, Flammability Rating: 0, 1.6 Specific Gravity, 70 - 90 Deg F Application, Applicable Materials: Ceramic Tile on Walls, Floors and Countertops, Application Method: Trowel, Synthetic Acrylic Latex Base, 40 - 100 Deg F, Resists: Water, Standards: ANSI Z88.2/A136.1 Type I, NIOSH Approved, OSHA 1910.134, For Indoor Applications
Packaging/Shipping Size and Weight:
Length: 8" | Width: 8" | Height: 7.75" | Weight: 14.5 lbs